Cancel
OK
BelgiumFrançais
selectionner votre localisation
Industries
vue globale- Agriculture, activités forestières et travail du bois
- Automobile
- Production de batteries
- Transformation chimique
- Construction et infrastructure
- Biens de consommation
- Production et distribution d’énergie
- Santé
- Hydrogène
- Logistique et transport
- Matériaux : traitement et transformation
- Métallurgie
- Industrie pharmaceutique
- Recyclage et traitement des déchets
- Énergies renouvelables
- Semi-conducteurs et électronique
- Bancs de test
- Automatisation et logistique interne des entrepôts
Services et assistance
vue globaleRessources
vue globaleEntreprise
vue globaleSolutions industrielles
vue globaleSolutions pour engins mobiles
vue globaleAgriculture, activités forestières et travail du bois
vue globaleMatériaux : traitement et transformation
vue globaleAutomatisation et logistique interne des entrepôts
vue globaleService
vue globaleOutils et eConfigurateurs
vue globaleAutomation Community
vue globaleFoires commerçiales et événements
vue globaleInternational
deconnection
selectionner votre localisation
3/2 and 4/2 directional poppet valve with solenoid actuation M-SED 10
Demande de Chiffrage
Code d'identification
M
-
SED
10
1X
/
350
C
K4
# Tiroirs compatibles :
190 de 190
Fluid suitability
Mineral oil
M
Mineral oil
Main ports
3
3 main ports
4
4 main ports
Type
Poppet valve
SED
Poppet valve
Size
Size 10
10
Size 10
Symbol
CK
3/2 directional seat valve
D
4/2 directional seat valve
UK
3/2 directional seat valve
Y
4/2 directional seat valve
Series
Series 10 … 19
1X
Series 10 … 19
Operating pressure
Operating pressure up to 350 bar [5076 psi]
350
Operating pressure up to 350 bar [5076 psi]
Solenoid version
Solenoid, wet-pin, with detachable coil
C
Solenoid, wet-pin, with detachable coil
For further ordering codes for other voltages see technical data
G110
Nominal voltage 110 V at DC solenoid with operation with AC voltage mains
G205
Nominal voltage 205 V at DC solenoid with operation with AC voltage mains
G24
Direct voltage 24 V
G96
Nominal voltage 96 V at DC solenoid with operation with AC voltage mains
Manual override
Without manual override
N9
With concealed manual override
Mating connectors, separate order
Without mating connector, individual connection with connector according to DIN EN 175301-803
K4
Without mating connector, individual connection with connector according to DIN EN 175301-803
Spool position monitoring
Without position switch
QMAG24
Monitored spool position “a”
QMBG24
Monitored spool position “b”
Check valve insert / throttle insert
Without check valve insert, without throttle insert
B12
Throttle Ø 1.2 mm [0.0472 inch]
B15
Throttle Ø 1.5 mm [0.0591 inch]
B18
Throttle Ø 1.8 mm [0.0709 inch]
B20
Throttle Ø 2.0 mm [0.0787 inch]
B22
Throttle Ø 2.2 mm [0.0866 inch]
P
With check valve insert
Seal material
NBR seals
V
FKM seals
Documentation
Ajouter au panier
| You have successfully finished your selection. |
| Référence produit: |
Description produit
Code d'identification:M-SED101X/350CK4
| Les données suivantes ont été sélectionnées | ||
|---|---|---|
| Fluid suitability | M | Mineral oil |
| Type | SED | Poppet valve |
| Size | 10 | Size 10 |
| Series | 1X | Series 10 … 19 |
| Operating pressure | 350 | Operating pressure up to 350 bar [5076 psi] |
| Solenoid version | C | Solenoid, wet-pin, with detachable coil |
| Mating connectors, separate order | K4 | Without mating connector, individual connection with connector according to DIN EN 175301-803 |